Custom Firmware Compilation
OpenWrt, ImmortalWrt, and LEDE images built per deployment with only the packages the site needs.
- Package set minimisation
- ARM64 / ARMv7 / MIPS targets
- Reproducible build pipeline
// HARDWARE & 5G ENGINEERING
Carrier-grade 5G connectivity, compiled to fit the site
From kernel configuration to antenna placement — firmware and RF are tuned together, because a link's stability depends on both.
- OPENWRT · IMMORTALWRT · LEDE
- 5G NR M.2
- RSRP · RSRQ · SINR
- MULTI-WAN FAILOVER
Supported modem silicon
Module integration validated across the four major 5G NR vendors, on both PCIe and USB transports.
| Vendor | Module Family | Bus Interface |
|---|---|---|
| Qualcomm | SDX-series 5G NR | PCIe Gen3 ×1 |
| UniSoC | V510 / V516 | PCIe · USB 3.0 |
| Fibocom | FM150 / FG150 | PCIe · USB |
| MediaTek | T700 / T750 | PCIe Gen3 ×2 |
RF & embedded capabilities
M.2 Module Integration
PCIe and USB mode-switching for 5G NR modules across the major silicon vendors.
- PCIe / USB mode switch
- KEY-B form factor
- Antenna diversity
RF Signal Optimisation
Per-site tuning of radio metrics and cell preference for stable throughput in marginal coverage.
- RSRP / RSRQ / SINR tuning
- Cell-tower locking
- Band aggregation
Resilient WAN Routing
Automated failover between uplinks so the gateway stays reachable when a bearer degrades.
- Multi-WAN failover
- Health-check policies
- Remote telemetry
Firmware build trace
mdsd@edge:~$make menuconfig TARGET=mediatek/filogic
→ selecting: kmod-usb-net-qmi-wwan, uqmi, umbim
mdsd@edge:~$make -j$(nproc) V=s
→ image: mdsd-gw-sysupgrade.bin (18.4 MB)
mdsd@edge:~$sysupgrade -n /tmp/mdsd-gw-sysupgrade.bin
→ reboot scheduled · config preserved
OpenWrtAT CommandsPCIe/USBQualcommFibocom